Having a properly functioning firearm is the first step to safety. First responders and veterans should have safe firearms to perform their security duties when using their armory arise properly. The only way to keep your firearm effective and reliable is by having scheduled cleaning sessions to ensure there is no solvent lying around to affect its functionality.
Concerning cleaning firearms, you require two essential tips to perform the deed perfectly. A titanium solvent trap and practical cleaning tips are just the right things to equip yourself with. Before we can go through some cleaning tips, let’s learn why to use one and choose the correct solvent trap for your firearm.
Titanium Solvent Trap
The titanium solvent trap kit from Armory Den is the ideal cleaning solution for your firearm. It comes with a 1/2×28″ or 5/8×24″ thread adapter, a 2.5″ tube extension, eight modular storage cups, and a sealed end cap.
This titanium solvent trap might include Type III Anodized 7075 Aluminum (1.1875 -24 TPI) Adapter. It’s meant to be attached to the standard 1.375-24 TPI tube thread. The adapter is ideal for firearm owners who use different industry muzzle adapters for a quick setup during connection and disconnection.
The solvent trap makes the firearm cleaning process simple and streamlined.
With detailed information on the titanium solvent trap, let’s look at the effective firearm cleaning tips.
Tips to Keep Your Firearm Fresh and Clean
Whether you’re out hunting, on duty in your local area, on a mission in another country, or dealing with a self-defense situation, using your firearm is inevitable. The shooting process is fun, but after that comes the cleaning process.
Unlike the common assumption by many firearm owners, the cleaning process isn’t over when you get a solvent trap kit. Learning how to clean your firearm effectively is as important in the process. So what tips should you use to end up with a fresh and clean firearm?
1. Avoid Abrasive Cleaners
Typically, abrasive cleaners cut down the firearm cleaning time. However, using them can cause far more harm than good.
Abrasive cleaners can damage the finishing or surface of your firearm. In addition, you should be more cautious if you are dealing with titanium. Titanium is fitted with a protective surface layer. The metal becomes more prone to gas cutting and erosion if you damage it, which eats it away.
In addition, be on the lookout for any warnings on the labels of cleaning products. Finishing such as bluing, nickel, chrome, and cerakote are vulnerable to damages.
2. Refrain from Using Steel
Avoid any cleaning solution made of steel. Avoid the likes of stainless steel brushes and stainless steel cleaning rods. It is because steel scratch surfaces and cause their edges to be dull similar to the rifling.
It would be best to avoid aluminum shavings because sharp edges can easily scrape them off. The shavings might end up in your gun, and that is dangerous.
Brass is ideal, durable, and soft enough to avoid scratching steel.
3. Opt for Lead-Free Primers
The primary cleaning solution is to prevent your firearm from getting dirty. Lead-free primers are the ideal pick for that task. Regular primers result in black crud and powder. Lead-free primers effectively reduce fouling which makes the firearm cleaning process much faster.
4. Protect the Crown
The muzzle is the barrel’s crown. The end of the rifling is vital for accuracy. Damage or disfiguring of the crown will affect the rifling. The bullet won’t clear the muzzle immediately. It causes expulsion and lopsided release that disrupts the bullet’s balance. It will make it slightly deviate from its path and degrade the accuracy.
5. Don’t Forget the Crannies and Nooks
Crud can build up in the nooks and crannies and cause a firearm malfunction. For example, baked-on accumulation of crud in the cutout in the slide and corners of the hood can cause the barrel to resist lockup in semi-automatic firearms.
For double-action revolver firearms, crud under the extractor star is a trouble spot. Some flakes of gunpowder will affect the seating of the star. A protruding star prevents the cylinder from rotating or closing. A quick brush where the star fits will be enough. A toothbrush will do the job.
Frequent shooting can accumulate crud in places difficult to get to, such as inside the firearm’s guts of the frame. It will require either a partial or complete disassemble to clean off the crud from your firearm correctly.
Cleaning is crucial to your safety and the performance of your firearm. You should get a solvent trap kit and ensure you are equipped with the correct firearm cleaning tips.
